Home :: Detail Parts :: Browse All Model Detail Parts
Browse all Detail Parts
|
Intermountain R-40-23 Reefer StirrupsWill do 2 cars. |
|
| |
|
IMWX / Red Caboose / Intermountain 40' Steel Boxcar StirrupsWill do 3 cars. |
|
| |
|
Intermountain Type 27 Tankcar StirrupsWill do 3 cars. |
|
| |
|
Proto2000 Type 21 Tankcar StirrupsWill do 3 cars. |
|
| |
|
Red Caboose Type 103W Tankcar StirrupsWill do 3 cars. |
|
| |
|
Intermountain R-40-10 Reefer StirrupsWill do 2 cars. |
|
| |
|
Branchline Postwar 40' Boxcar StirrupsWill do 4 cars. |
|
| |
|
P2K 50' Autocar StirrupsWill do 4 cars. |
|
| |
|
P2K Mill Gondola StirrupsWill do 4 cars. |
|
| |
|
Red Caboose X29 StirrupsWill do 4 cars. |
|
| |
|
BX-11,12,13 Stirrups
|
|
| |
|
Straight Leg StirrupWill do 4 cars. |
|
| |
|
12" Angled Leg StirrupWill do 4 cars. |
|
| |
|
12" Double Angled StirrupWill do 4 cars. |
|
| |
|
Intermountain SFRD Reefer StirrupsIncludes hatch rests. Will do 2 cars. |
|
| |
|
Curved Leg Face Mount StirrupsWill do 4 cars. |
|
| |
|
Westerfield Caswell Gon Stirrups
|
|
| |
|
Tangent GSC Tankcar StirrupsWill do 1 car. |
|
| |
|
Curved Leg Underbody Mount Sill StepsWill do 3 cars. |
|
| |
|
Westerfield ATSF SK-L,N,P Stirrups
|
|
| |
|
Athearn R-70-12 StirrupsWill do 1 car. |
|
| |
|
ATSF Raised Roof BX-11, 12, 13 Stirrups
|
|
| |
|
ATSF Bx-W Stirrups
|
|
| |
|
PRR X29 Express Car Stirrups
|
|
| |
|
GATC Type 30 Stirrups
|
|
| |
|
40' Apex Tri-Lock with brake step *Temporarily Out Of Stock*YMW-250 Temporarily Out Of Stock |
|
| |
|
40' US Gypsum with brake step
|
|
| |
|
40' Morton style with brake steps
|
|
| |
|
Laser cut 40' wood running board with laterals and etched brackets
|
|
| |
|
Laser cut running boards for Intermountain SFRD reefersPart #YMW-257 :: $12.00 (+S&H) Laser cut running boards for Intermountain SFRD reefers with both styles of hatch platforms. |
|
| |
|
14"' 8 Rung Ladder
|
|
| |
|
16" 7 Rung Ladder
|
|
| |
|
16" 8 Rung Ladder
|
|
| |
|
18" 7 Rung Ladder
|
|
| |
|
Left-Side 2 Rung Ladder
|
|
| |
|
15-3/8" 8 Rung Ladder
|
|
| |
|
19" 4 Rung Ladder
|
|
| |
|
18-1/2" HO Scale Etched Ladder Rungs
|
|
| |
|
18" HO Scale Etched Ladder Rungs
|
|
| |
|
17-1/2" HO Scale Etched Ladder Rungs
|
|
| |
|
17" HO Scale Etched Ladder Rungs
|
|
| |
|
16-1/2" HO Scale Etched Ladder Rungs
|
|
| |
|
16" HO Scale Etched Ladder Rungs
|
|
| |
|
15-1/2" HO Scale Etched Ladder Rungs
|
|
| |
|
15" HO Scale Etched Ladder Rungs
|
|
| |
|
14-1/2" HO Scale Etched Ladder Rungs
|
|
| |
|
14" HO Scale Etched Ladder Rungs
|
|
| |
|
Acid Tank Car Platform and LaddersWill do one car. |
|
| |
|
Etched Tank Car Straps, 0.030" wide x 3.75" longWill do one car. |
|
| |
|
Etched Tank Car Straps, 0.040" wide x 3.75" longWill do one car. |
|
| |
|
Running Board and Lateral BracesRunning board and lateral braces. Will do one car. |
|
| |
|
PFE Ice Hatch Latches
|
|
| |
|
Lift Lever 1, Operating Lever 1Will do 5 cars. |
|
| |
|
Lift Lever 2, Operating Lever 1Will do 5 cars. |
|
| |
|
Lift Lever 3, Operating Lever 2Will do 5 cars. |
|
| |
|
Lift Lever 21, Operating Lever 14Will do 5 cars. |
|
| |
|
Lift Lever 16, Operating Lever 17Will do 5 cars. |
|
| |
|
Lift Lever 2, Operating Lever 2Will do 5 cars. For most generic applications. |
|
| |
|
Eyebolt No CollarThe commercial bent wire eyebolts have always been oversize. By photoetching we can reduce the size to a far more prototype appearance. We offer 2 frets of eyebolts with a mix of sizes to serve all your needs. The photos show the parts with a piece of 0.010" wire so you can get a real sense of small these items are. But since they're phosphor bronze they are robust. They come either with or without simulated collars. |
|
| |
|
Eyebolt w/ CollarThe commercial bent wire eyebolts have always been oversize. By photoetching we can reduce the size to a far more prototype appearance. We offer 2 frets of eyebolts with a mix of sizes to serve all your needs. The photos show the parts with a piece of 0.010" wire so you can get a real sense of small these items are. But since they're phosphor bronze they are robust. They come either with or without simulated collars. |
|
| |
|
Bracket Grab Drilling TemplateThese etched drilling templates will allow you to accurately lay out holes for mounting the superb Kadee bracket grabs and ladders. |
|
| |
|
Brake Levers, Set of 10Set of ten (10) pair, photo-etched phosphor bronze HO scale detail part. The little tab is for hooking the chain. |
|
| |
|
Ladder Drilling TemplateThese etched drilling templates will allow you to accurately lay out holes for mounting the superb Kadee bracket grabs and ladders. |
|
| |
|
PRR X29 Full Side Patch PanelsWill do one car. |
|
| |
|
Etched Airhose BracketsSecure these to the underside of the car and use a "U" of thin wire to clamp the airhose to the bracket, much like the prototype does. |
|
| |
|
Etched Cut Lever BracketsFor more modern cars, to hang the bottom actuated cut levers. |
|
| |
|
Pin Plate Slack Adjustor6 Units. |
|
| |
|
End Door Early Style
|
|
| |
|
End Door Later Style
|
|
| |
|
Retainer ValvesPart #YMW-0060 :: $6.00 (+S&H)
|
|
| |
|
5/5 Sq Corner
|
|
| |
|
NSC-1 10'0" IH
|
|
| |
|
NSC-2 10'0" IH
|
|
| |
|
5/5 W Corner
|
|
| |
|
4/4 IDE 10'0" IH
|
|
| |
|
4/4 IDE 10'6" IH
|
|
| |
|
NSC-2 10'6" IH
|
|
| |
|
NSC-3 10'6" IH
|
|
| |
|
4/5 Square Corner, 10'0" IH
|
|
| |
|
4/5 W Corner, 10"0" IH
|
|
| |
|
5/5 W Corner, 10'6" IH
|
|
| |
|
4/4 IDE 10'6" IH
|
|
| |
|
ACF Corrugated EndPart #YMW-2148 :: $7.00 (+S&H)
|
|
| |
|
ACF Carbuilder End 10'6" IH
|
|
| |
|
Tack Boards
|
|
| |
|
Hutchins Flat Panel Roof
|
|
| |
|
Murphy Flat Panel Roof
|
|
| |
|
The ACF Proprietary Roof
|
|
| |
|
Square Panel 40' Roof
|
|
| |
|
Diagonal Panel 40' RoofDiagonal Panel 40' Roof |
|
| |
|
PS-1 40' RoofPS-1 40' Roof |
|
| |
|
6' 10'6" Yngs Early Camel
|
|
| |
|
6' 10'6" Superior
|
|
| |
|
6' 10'6" Yngs Later Camel
|
|
| |
|
8' Yngs Door
|
|
| |
|
10 Panel, 10'0" Boxcar with Diagonal Panel RoofPart #B-10'0 D :: $25.00 (+S&H) A 10 panel riveted, 10'0" inside height boxcar with a diagonal panel roof. |
|
| |
|
10 Panel, 10'0" Boxcar with Square Panel RoofPart #B-10'0 S :: $25.00 (+S&H) A 10 panel riveted, 10'0" inside height boxcar with a square panel roof. |
|
| |
|
10 Panel, 10'6" Boxcar with Diagonal Panel RoofPart #B-10'6 D :: $25.00 (+S&H) A 10 panel riveted, 10'6" inside height boxcar with a diagonal panel roof. |
|
| |
|
10 Panel, 10'6" Boxcar with Square Panel RoofPart #B-10'6 S :: $25.00 (+S&H) A 10 panel riveted, 10'6" inside height boxcar with a square panel roof. |
|
| |
|
12 Panel, 10'0" Boxcar with Diagonal Panel RoofPart #YMW-B12P-D :: $25.00 (+S&H) A 12 panel riveted 10' IH Boxcar with a diagonal panel roof. |
|
| |
|
12 Panel, 10'0" Boxcar with Square Panel RoofPart #YMW-B12P-S :: $25.00 (+S&H) A 12 panel riveted 10' IH Boxcar with a square panel roof. |
|
| |
|
Ladder Assembly JigPart #YMW-LAJ :: $12.00 (+S&H) These laser cut parts have been carefully sized to help you assemble out etched ladder parts. The jig is slotted for 3 common sizes of our ladders. Instructions are included. |
|
| |
Shipping & Handling
| Order Total | Shipping & Handling |
| $40 - $89.99 | $12.00 |
| $90 - $139.99 | $15.00 |
| $140 - $179.99 | $22.00 |
| $180 - $239.99 | $27.00 |
| $240 and over | Contact us for rates |
Due to changes at US Customs and Border Protection and Canada Post, we are no longer able to mail small parts orders as letter mail. As a result we have to implement a minimum order policy effective immediately.
Orders will now have to be at least $40.00 before shipping costs are added.
I very much regret having to do this, but the government agencies leave me with no option.
