Eye Bolts & Miscellaneous Detail Parts

Ladder Assembly Jig

Part #YMW-LAJ :: $12.00 (+S&H)

These laser cut parts have been carefully sized to help you assemble out etched ladder parts. The jig is slotted for 3 common sizes of our ladders. Instructions are included.

The modeler will have to supply 2 6-32 x 1/2" bolts, washers and wingnuts.

Acid Tank Car Platform and Ladders

Part #YMW-370 :: $7.00 (+S&H)

Will do one car.

Etched Tank Car Straps, 0.030" wide x 3.75" long

Part #YMW-371 :: $4.00 (+S&H)

Will do one car.

Etched Tank Car Straps, 0.040" wide x 3.75" long

Part #YMW-372 :: $4.00 (+S&H)

Will do one car.

Running Board and Lateral Braces

Part #YMW-381 :: $4.00 (+S&H)

Running board and lateral braces. Will do one car.

PFE Ice Hatch Latches

Part #YMW-382 :: $4.00 (+S&H)

Eyebolt No Collar

Part #YMW-500 :: $4.00 (+S&H)

The commercial bent wire eyebolts have always been oversize. By photoetching we can reduce the size to a far more prototype appearance. We offer 2 frets of eyebolts with a mix of sizes to serve all your needs. The photos show the parts with a piece of 0.010" wire so you can get a real sense of small these items are. But since they're phosphor bronze they are robust. They come either with or without simulated collars.

Eyebolt w/ Collar

Part #YMW-501 :: $4.00 (+S&H)

The commercial bent wire eyebolts have always been oversize. By photoetching we can reduce the size to a far more prototype appearance. We offer 2 frets of eyebolts with a mix of sizes to serve all your needs. The photos show the parts with a piece of 0.010" wire so you can get a real sense of small these items are. But since they're phosphor bronze they are robust. They come either with or without simulated collars.

Bracket Grab Drilling Template

Part #YMW-502 :: $4.00 (+S&H)

These etched drilling templates will allow you to accurately lay out holes for mounting the superb Kadee bracket grabs and ladders.

Brake Levers, Set of 10

Part #YMW-503 :: $4.00 (+S&H)

Set of ten (10) pair, photo-etched phosphor bronze HO scale detail part. The little tab is for hooking the chain.

Ladder Drilling Template

Part #YMW-504 :: $4.00 (+S&H)

These etched drilling templates will allow you to accurately lay out holes for mounting the superb Kadee bracket grabs and ladders.

PRR X29 Full Side Patch Panels

Part #YMW-505 :: $5.00 (+S&H)

Will do one car.

Etched Airhose Brackets

Part #YMW-506 :: $4.00 (+S&H)

Secure these to the underside of the car and use a "U" of thin wire to clamp the airhose to the bracket, much like the prototype does.

Etched Cut Lever Brackets

Part #YMW-507 :: $4.00 (+S&H)

For more modern cars, to hang the bottom actuated cut levers.

Pin Plate Slack Adjustor

Part #YMW-508 :: $7.00 (+S&H)

6 Units.